How to easily format error or unreadable flash drives
How to easily format error or unreadable flash drives

How to easily format error or unreadable flash drives

Hello guys, welcome back to refitandroid.com, in this article there is an interesting discussion about how to format a flash drive that we will discuss and explain below.

Do you want to erase all the data on the flash but can’t because the flash is infected with a virus? Then you need to practice how to format this flash.

Generally people flash format with File Explorer. But apart from using file explorer we can also format the flash using cmd.

This method is usually used if our flash drive is damaged or affected by write protection.

Because sometimes we connect the flash to a computer that may be infected with a virus.

So, with the flash format, various viruses attached to this data will also be removed.

For some people who are already familiar with the computer world, flash formatting is common.

However, for some who are still learning how to use a computer, they may not know how to properly format the flash.

Before that, it would be good to recognize the different options or sections in formatting.

That’s because when we do formatting we do it properly and correctly.

How to Format Flashdisk: Format Flashdisk settings

How to format Flashdisk

See also: How to speed up IDM

Here we will discuss which parts are in flash format.

The file system

1. NTFS (New Technology File System)

It is a system that can only work on Windows operating system. If we choose this file system format. So we can’t use flash on other OS like Mac and Linux.

But with this disadvantage there is another advantage that NTFS has no file size limit. So if we want to send a file with a large enough size. Then we can choose the file system format on it.

2. FAT32 (File Allocation Table 32)

A very commonly used file system. Because this file system supports all operating systems both Windows, Linux, Mac and various other operating systems.

This file system format is also commonly used on flash drives as media such as for playing songs in cars and so on.

But with this advantage, FAT32 has the disadvantage that it has a file size limit of 4GB. Therefore, by using this file format. We cannot save files larger than 4 GB.

3. exFAT

This file system format has no file size limit. This format also works on Mac and Windows.

But to use it on Linux we need the help of an application to be able to read it. For this format it is still rarely used.

How to format a secure flash drive

Through File Explorer

For the first way is the most commonly used method to format the flash.

See also: How to Remove Positive Internet on Mobile

Write-protected flashdisk format:

  1. Make sure the flash drive is connected to the computer
    After the flash is properly connected. Then.
  2. right click on flash
    Next to format, right click on the flash and then select Format option.
  3. click the Start button for
    If the settings are considered correct, click the Start button to begin the formatting process.
  4. Wait until the formatting process is complete
    If a warning appears, click OK. Wait until the formatting process is complete. Format duration is affected by many factors. Such as flash quality, flash size, computer quality, flash data and format options.
  5. Click OK.
    When the formatting is complete, a notification will appear informing us that the formatting process was successful. Click OK.

Flashdisk format Through CMD

The formatting process using this method is quite complicated compared to the first method. But we can use this method if the above method doesn’t work for us. Generally, the flash format using CMD is used if the flash has errors or damage, such as encountering write protection.

How to format flash with cmd:

  • Connect the flash to our laptop.
  • After that run CMD with administrator access.
  • After the CMD display appears, do the following command “diskpart” and then press Enter.
  • After that, type “list disk” and press Enter. This command works so that CMD shows all the disks on our computer, including the flash.
Format the flash drive with cmd
  • In this step we have to carefully choose which disk is our flash drive. Because if we choose the wrong one, our hard drive will be formatted. Enter the select disk # command. # here we will fill in according to the disk our flash is on. If our flash is on Disk 1, type the command select disk 1 and press Enter.
  • Before formatting, please make sure that the disk you have chosen is correct. Then type the cleanup command then Enter. Wait until it says DiskPart successfully cleaned the disk where it says flash format was successful.
  • There is a next step. Type the create primary partition command and press Enter.
How to format CMD flash drive
  • Then write the command select partition 1 .
  • Then type active to activate the partition.
  • Then we will do the format in format NTFS and give it a name. Write formatting command FS=NTFS label=”HH”-fast drive previous. Change the word “HH” with the desired flash name. How to format flash on laptop
  • Finally type the command assign letter = N to provide a driver’s license. Change the text “N” with the desired letter.
  • When you type Exit to get out of diskpart utility or can close CMD immediately.

See also: How to use Mi Drop

This is how to format your flasdisk which is safe, good and correct, good luck, thanks